Grc cement floor 500 type improvement: upper and lower galvanized steel edging
Inorganic network floor bracket 1 is a new ultra-low bracket developed by our company. For the customized bracket that requires ultra-low bracket height in the fast assembly industry, the bracket height is between 5cm and 10cm. The head is made of plastic, the top is a hexagonal screw hole, and the middle is made of a patch and a plastic silencing leather sleeve. The noise reduction leather cover also avoids the friction between grc cement floor and veneer. The thickness of the upper bracket is 3mm, and the thickness of the lower bracket is 2mm.
Inorganic silicate has a fairly good thermal barrier effect and is a permanent non combustible solid. When a 600 ℃ flame intensity is applied to one side of the floor, it takes 1h to transfer it to the other side. There is enough time to escape or rescue property. Inorganic silicate is insoluble in water. In case of water leakage, the floor will not affect the floor quality even if it is completely immersed in water, It can be used completely. When the deflection of inorganic floor is 3mm, the bearing capacity can reach 430KG. The main material of inorganic network floor is similar to that of the building, so its service life is the same as that of the building.
|
name |
size（mm） |
Concentrated load（KG） |
limit load（N） |
Uniform loadN/M2 |
Fire resistance |
|
Ultra-low grc cement floor support |
The upper bracket is 3mm, and the lower bracket is 2mm |
- |
- |
- |
- |
|
Raised floor surface |
Bottom support system |
|||||
|
|
|
|
|
|
|
|
Carpet series |
HPL series |
Homogeneous penetrating PVC series |
High abrasion resistant PVC series |
Ceramic series |
Multilayer solid wood series |
Bottom support system |